Best Stainless Steel Roti Maker by Size and Weight

The best stainless steel roti maker is the Generic Stainless Steel Puri Press, a 2 x 4 x 4 in press that fits a drawer and still handles puri, papad and small chapati. If you want a wider flatbread, the SELERS Tortilla Press runs 10.5 in with an adjustable hinge for thickness. Get this choice wrong and you find out the expensive way: a press whose plate is smaller than the roti you actually roll, sitting unused behind the mixer.

Best stainless steel roti maker at a glance

Which buyer does each press actually suit?

I sorted these five by the person holding the handle, not by the spec sheet. That is the only way this set makes sense, because the picks are not competing for the same job.

• The small-batch puri cook. You press 15 or 20 small discs at a time, you want the press in a drawer, and 4 x 4 in is plenty. The Generic Puri Press is built for you.
• The first-time buyer. You are not sure a manual press will stick in your routine. Spend the least, get the largest plate the entry tier offers, and find out. That is the 2 lb Generic Roti Maker Press.
• The everyday cook who hates replacing things. You press flatbreads several times a week for years. Weight is a feature, not a problem. Victoria's 8 lb cast iron carries a Limited Lifetime warranty, the only published warranty in this group.
• The big-flatbread household. You want 10 in tortillas and rotis and you do not want to lift 8 lb every time. Bamboo at 6 lb sits between the extremes.
• The cook who wants control. Thin for papad, thicker for chapati, same tool. SELERS claims an adjustable hinge, and at 10.5 in it is the widest press here.

One honest note on the search term: only two of these five are stainless steel bodies. That is worth knowing before you scroll.

Why plate size decides this more than metal does

Most guides to the best stainless steel roti maker start with the metal. Steel versus iron, food-grade versus coated, rust versus seasoning. That argument is real, but it is not the one that decides whether you keep using the press.

Plate size decides it. A press flattens dough to the diameter of its plates and no further. If you habitually roll a 7 in chapati and buy a press with a 4 x 4 in body, you get a small thick disc and a rolling pin session afterwards. The press saved you nothing.

So measure first. Take one of the rotis you actually make and put a ruler across it. Then match that number to the size figures in the table above. The spread here is wide: 4 x 4 in at one end, 10.5 in at the other.

The second criterion is weight, and it works against size. Bigger plates mean more metal. Victoria's press is 8 lb. The bamboo pick is 6 lb. The budget stainless press is 2 lb. Heavier presses need less arm force because their own mass does part of the work, but they also need a spot on the counter where you are willing to leave them.

Thickness control comes third. Only one listing here claims it.

1. Generic Stainless Steel Puri Press Roti Maker Press — Best overall

The most drawer-friendly press in this set, and the one that suits the small discs most Indian kitchens actually press.

Best for: puri and small chapati in a tight kitchen Skip it if: you want 8 inch rotis

At 2 x 4 x 4 in overall, this is by a wide margin the smallest press here. That number is the whole case for it. The next-widest published figure in this group is Victoria's 8 in, and the widest is 10.5 in, which means those two presses need permanent counter or shelf real estate. This one goes in a utensil drawer between uses.

Size is listed as Medium, colour silver, model AEP60791284, sold as a single unit. The listing describes rust-resistant stainless steel and a smooth surface that dough is less likely to cling to, and it names puri, roti, chapati, papad, khakhra and tortillas as intended uses. Those are manufacturer claims, not verified measurements, but the dimensions are the part that matters and those are published.

It is also the second-cheapest of the five, sitting in the entry tier alongside the other Generic pick.

The trade-off is real. A 4 in plate is a puri and papad tool. If your household eats large rotis, the two 10 in presses do a job this one physically cannot. It is also the slowest seller of the five, and only one seller lists it.

Pros:

• Smallest footprint here at 2 x 4 x 4 in
• Fits a drawer, not just a countertop
• Second-cheapest pick in the set
• Stainless steel body, one of two in this group
• Handle fitted, no assembly mentioned

Cons:

• 4 in plate is too small for large rotis
• No weight figure published
• No stated warranty
• Only one seller lists it
• Sells the slowest of these five

2. Generic Stainless Steel Roti Maker Press with Handle — Best budget pick

The cheapest way into a stainless press with a larger plate, if you can live without a published diameter.

Best for: first-time buyers who want a larger plate cheaply Skip it if: you need published plate dimensions before buying

This is the cheapest of the five and the lightest at 2 lb. Size is listed as Large, which is more than the Medium above it, but the listing publishes no plate diameter. That gap matters and I will not paper over it.

What you do get is a full spec line otherwise: silver finish, model 01012, single unit, 2 lb. The listing describes food-grade stainless steel, a pre-fitted ergonomic handle for manual pressing with no electricity, and uniform thickness across roti, chapati, papad, khakhra, puri and tortillas. Again, those are the maker's words.

Two pounds is the interesting number. Victoria weighs four times as much. A light press means you do more of the work with your arm, and it also means you can lift it out of a high cabinet without planning the movement. For a cook who is not yet sure a manual press earns its space, that combination is the right first purchase.

Against the rest of the set, it publishes the least. No dimensions, no warranty, a size word instead of a figure. It also sells faster than the top pick, so it is not obscure, but only one seller stocks it.

Pros:

• Cheapest pick in this comparison
• Lightest at 2 lb, easy to lift and store
• Listed as Large, bigger plate than the top pick
• Stainless steel with a pre-fitted handle
• Non-electric, no cord or outlet needed

Cons:

• No plate diameter published anywhere
• No dimensions listed at all
• No stated warranty
• Light weight means more arm effort per press
• Single seller only

3. Victoria 8 Inches Cast Iron Tortilla Press — Best warranty

The only press here with a published warranty, and the only one whose weight does the pressing for you.

Best for: daily cooks who want one press for decades Skip it if: you cannot lift and store 8 lb

Victoria publishes a Limited Lifetime warranty. Nobody else in this set publishes any warranty at all, which makes this the single most concrete durability signal in the group. It is also the pick buyers choose most often here by a very large margin.

The figures: 8 in plates, 3.1 x 8 x 8 in overall, 8 lb, black, model TOR-003. Eight pounds is four times the budget pick. On a press, mass is leverage. The listing describes reinforced flat plates engineered to prevent pinching and an ergonomic handle, plus seasoning with non-GMO flaxseed oil and no PTFE or PFAS coatings. Victoria states it has made cast iron in Colombia since 1939.

The plate size is the practical sweet spot for chapati and roti. Eight inches covers most home flatbreads without demanding the counter depth the 10.5 in press needs.

Two honest costs. It is cast iron, not stainless, so it sits outside the strict reading of what you searched for. And the listing is explicit that it must never be air-dried or put in a dishwasher, so you are committing to hand-drying and re-oiling. That is more maintenance than a stainless plate you can simply rinse and wipe.

Pros:

• Limited Lifetime warranty, the only one here
• 8 in plates suit standard chapati and roti
• 8 lb mass reduces hand force per press
• No PTFE or PFAS in the seasoning, per the listing
• Compact 3.1 x 8 x 8 in for its plate size

Cons:

• Cast iron, not stainless steel
• Needs hand-drying and re-seasoning, no dishwasher
• 8 lb is heavy to lift down from a shelf
• Sits in the most expensive tier of this set
• Single seller listed

4. CBFULLRES Wooden Tortilla Press Bamboo — Best upgrade

A 10 in plate at 6 lb, which is the best size-to-weight ratio in this group.

Best for: the largest flatbreads at moderate weight Skip it if: you want an all-metal press you can scrub hard

Here is the arithmetic that earns this pick its place. It presses 10 in, two inches wider than Victoria, while weighing 6 lb instead of 8 lb. Nothing else in the set gets you a bigger plate for less weight.

Specs: Extra Large size, 10 in, 6 lb, yellow, model X2. The listing describes 100% natural bamboo with food-grade stainless steel hardware, an ergonomic handle, and delivery fully assembled with no setup required. It is the only pick here with more than one seller.

Bamboo changes the handling. Wood is warmer to hold than cold metal in a winter kitchen and it does not clang on a stone counter. It also means the press body absorbs moisture in a way steel does not, so wiping down promptly matters more than it would with the two stainless picks.

The trade-offs. This is a bamboo press, so it does not satisfy a strict stainless-steel requirement any more than the cast iron does. No dimensions beyond plate size are published, so you cannot check thickness closed. No warranty is stated. And its price position sits above both Generic presses without publishing any more figures than they do.

Pros:

• 10 in plate, second-widest in this set
• 6 lb, lighter than the 8 lb cast iron
• Arrives fully assembled per the listing
• Bamboo body with food-grade stainless hardware
• Two sellers stock it, the only pick here with more than one

Cons:

• Bamboo, not a stainless steel body
• Wood needs prompt wiping, not soaking
• No overall dimensions published
• No stated warranty
• Costs more than both Generic presses

5. SELERS Tortilla Press Stainless Steel — Best premium

The widest press here and the only one claiming adjustable thickness, which makes it the flexible choice in the best stainless steel roti maker field.

Best for: cooks who want thickness control in stainless Skip it if: counter depth is under 12 in

Ten and a half inches. That is the widest plate in this comparison, and it is paired with the only adjustable-thickness claim in the group. SELERS says the hinge connection was designed to be adjusted for different dough thicknesses, which in principle means thin for papad and thicker for chapati from one tool.

The published figures are 10.5 in, overall 3.81 x 11.4 x 8.26 in, silver, model SELERS0031. The listing describes a lever design that forms a force point between plate and handle, heavy-duty stainless steel construction, an ergonomic handle with a bear-shaped profile, and multipurpose use across tortillas, roti, flatbreads, taco shells and pie crust.

It is the second stainless steel body here, so it and the top pick are the only two picks that match your search term exactly. Between them they bracket the size range completely: 4 in and 10.5 in, nothing in between.

The costs are size and silence. At 11.4 in long it is the largest object in this set and needs a full 12 in of counter depth to sit and swing. No weight is published, which is a real gap on a press. There is no stated warranty, it is the most expensive pick here, and only one seller lists it.

Pros:

• Widest plate in this set at 10.5 in
• Only pick claiming adjustable thickness
• Stainless steel body, matches the search exactly
• Full overall dimensions published
• Lever design aimed at lower hand force

Cons:

• Largest footprint here at 11.4 in long
• No weight figure published
• Most expensive pick in this comparison
• No stated warranty
• Single seller only

Stainless steel, cast iron or bamboo: what changes?

Two of these five have stainless steel bodies. The Victoria is cast iron. The CBFULLRES is bamboo with stainless hardware. If you typed stainless into the search box, it is worth knowing that the results did not fully honour it, and you should judge material for yourself rather than take a listing's word for it.

What each material actually changes, based on what the listings state:

1. Stainless steel. The Generic Puri Press and SELERS both describe rust resistance and a smooth surface. Practically, that means a rinse-and-wipe routine and no seasoning schedule. Neither publishes a warranty.
2. Cast iron. Victoria is seasoned with flaxseed oil and states no PTFE or PFAS. It also states the press must never be air-dried or put in a dishwasher. You are trading a maintenance ritual for a Limited Lifetime warranty.
3. Bamboo with steel hardware. The 6 lb weight is the payoff, and it is a real one at 10 in. Wood needs the same courtesy any wooden board needs.

None of these materials is wrong. What is wrong is buying cast iron and then resenting the drying, or buying bamboo and then soaking it.

How much counter and cabinet space will it eat?

This is the question the table answers fastest, and it is where two of these picks separate hard from the others.

Measure your counter depth and your drawer height before you order. The Generic Puri Press is 2 in tall closed and 4 x 4 in across, so a standard utensil drawer swallows it. SELERS is 3.81 x 11.4 x 8.26 in, and that 11.4 in length includes the handle arm, which needs clearance to swing upward as well as room to lie flat.

Victoria splits the difference at 3.1 x 8 x 8 in. Compact for an 8 in press, but 8 lb means you are not lifting it in and out casually. Most people who buy it leave it out.

• Drawer storage possible: the Generic Puri Press at 2 x 4 x 4 in
• Cabinet storage realistic: the 2 lb budget press, the lightest here
• Counter resident: Victoria at 8 lb, and SELERS at 11.4 in long
• In between: the 6 lb bamboo press, liftable but bulky at 10 in

If your kitchen has no permanent free counter square, that narrows the best stainless steel roti maker choice to the two lightest picks immediately, regardless of what else you wanted.

What the listings do not tell you

I compared these five side by side, and the gaps in what gets published are as informative as the figures.

No listing here states a plate thickness or plate flatness figure, which is what actually determines whether your roti comes out even. No listing states how much force the lever multiplies. Only one, SELERS, claims adjustability at all, and it gives no range for that adjustment.

Two picks are missing figures you would want. The budget Generic press publishes no dimensions and no plate diameter, only the word Large. SELERS publishes no weight, which on a press is a meaningful omission because weight and required hand force move together.

Only Victoria publishes a warranty. Four of five say nothing about what happens if a hinge fails.

Four of the five are stocked by a single seller. Only the bamboo press has two. That is not a quality signal either way, but it does mean you are usually looking at one source for the item.

The verdict

The best stainless steel roti maker for most people is the Generic Stainless Steel Puri Press. A 2 x 4 x 4 in stainless press that stores in a drawer, sits in the entry tier, and handles the puri, papad and small chapati that make up most weekday pressing. It is the pick you buy when kitchen space is the binding constraint, and for a lot of households it quietly is.

Two conditions flip that.

First, plate size. If the flatbreads you roll measure more than about 6 in, the 4 in plate cannot help you and no amount of build quality changes that. Go to SELERS at 10.5 in, the widest here and the only press claiming adjustable thickness, or the 10 in bamboo press if 6 lb beats 11.4 in of counter length for your layout.

Second, longevity. If you press several times a week and want the decision settled permanently, Victoria's Limited Lifetime warranty is the only such commitment in this set, and 8 in plates at 8 lb make it the least effortful presser here. The cost is cast iron care: no dishwasher, no air-drying, and a re-oiling habit.

The runner-up's exact advantage is price, nothing more. The 2 lb Generic press is the cheapest way to find out whether a manual press belongs in your routine at all.

FAQ

Is a stainless steel roti maker worth it over a rolling pin?

A stainless steel roti maker is worth it if you press in batches. One lever stroke replaces several rolling passes, and the plates give you consistent diameter across every disc, which a rolling pin only delivers with practice. For two or three rotis a week the pin is fine. For twenty puris on a Sunday, the press pays back the drawer space.

Which press gives the best value in this set?

The best value in this set is the 2 lb Generic Roti Maker Press with Handle. It is the cheapest pick here, it is listed as Large rather than Medium, and it is the lightest press in the comparison at 2 lb. The catch is disclosure: no plate diameter and no dimensions are published, so you are accepting some uncertainty about exactly how wide it presses.

What plate size do I need for standard chapati?

The plate size you need for standard chapati is roughly the diameter of the chapati itself, which for most home cooks lands between 6 and 8 in. Victoria's 8 in plates cover that comfortably. The 10 in bamboo press and the 10.5 in SELERS give headroom for larger flatbreads. The 4 x 4 in Generic Puri Press is a puri and papad tool instead.

Victoria cast iron or SELERS stainless steel: which should I pick?

Victoria cast iron or SELERS stainless steel comes down to maintenance versus flexibility. Victoria brings 8 in plates, 8 lb of pressing mass and a Limited Lifetime warranty, but the listing bars dishwashers and air-drying. SELERS brings 10.5 in plates, a stainless body and the only adjustable-thickness claim here, with no published warranty and an 11.4 in footprint.

What mistake do first-time buyers make in this category?

The mistake first-time buyers make is choosing on material and price while ignoring plate diameter. A press cannot flatten dough wider than its plates, so a 4 in press and a 10.5 in press are different tools, not different grades of the same tool. Measure a roti you already make, then match that figure to the size column before anything else.

Start with a ruler, not a shopping cart. Lay it across one roti from your last batch, note the number, and the field narrows to two or three picks immediately. If that number is small and your kitchen is smaller, the 2 x 4 x 4 in Generic Puri Press is the pick that will still be in the drawer a year from now rather than shoved behind the stand mixer, and that is the real test of a manual press. If the number is 8 in or more, buy the plate size you need first and treat material as the tiebreaker it actually is.

Last updated: October 2, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.